1. Use the correct cutting direction: Follow the arrows indicated on each clip of the wire saw and cut in the specified direction. Cutting in the opposite direction can cause tapering of the diamond beads, leading to decreased cutting speed and performance.
2. Regularly sharpen the wire saw: After using the wire saw for a period of time, if you notice a decrease in cutting speed, you can sharpen the diamond beads by placing a neat arrangement of refractory bricks on the material being cut. This can help restore the sharpness of the beads and improve cutting efficiency.
3. Ensure proper cooling: Cooling is crucial during wire saw cutting to prevent bead burning and maintain cutting speed. Use tap water to cool the saw, but be cautious not to use excessive amounts of cooling water. The recommended amount is 1.5-2 times the diameter of the diamond beaded wire saw. Adjust the water flow based on the noise during cutting and the clarity of the cooling water. Too much water can affect the self-grinding property of the saw, causing slippage, while too little water can result in bead overheating and reduced cutting life.
4. Clean and inspect the wire saw regularly: Remove debris, grit, and other contaminants from the wire saw to maintain its cutting performance. Inspect the wire saw for any signs of wear or damage, such as bent or broken beads, and replace or repair as necessary.
5. Use proper tension: Ensure that the wire saw is properly tensioned according to the manufacturer's recommendations. Improper tension can affect the cutting speed and may lead to premature wear or failure of the wire saw.
Remember to always follow the manufacturer's guidelines and recommendations for the specific wire saw you are using. Proper maintenance and care will help maintain the cutting speed and performance of the wire saw, resulting in efficient and effective stone processing.
Know more about Z-LION Diamond Tools Group
Xiamen ZL Diamond Technology Co., Ltd. is a New Three Board listed enterprise, engaged in the development and application of diamond new material. We innovate new material and application in diamond super hard field, strive to offer advanced diamond new material application products and solution.
We mainly produce diamond tools including diamond polishing pads,diamond core drill bit, diamond wire saw, etc. Our products are widely used in the cutting, grinding and polishing field of stone, ceramic, glass, concrete.
For twenty years, we keep on focusing on the innovation of our products, make our efforts on brand management and marketing operation, keep raising high level of our brand and market ratio, get highly recognized by the diamond tools industry. We are honored as “National Intellectual Property Advantage Enterprises”, “Fujian Innovative Enterprises”, drafting unit of “Diamond Flexible Polishing Pads Industrial Standard”. At the same time, many products are first innovated by us. By far, we own 63 of domestic and international patents. Our products are welcome in the market of Europe, North and South American, South-East Asia, Middle Asia, etc. Good reputation has won praise and trust from home and abroad.
Contact us, you will get more than what you see.
-All diamond tools can be ordered and fabricated!
-Henry Wang | Quote Manager
-WhatsApp:+86-18030177538
-Email: ceo@zdiamondtools.com
-Web www.zdiamondtools.com
Company Profile
