Because the wire saw is processing various brittle and hard materials for a long time every day, the wire saw will be easily worn, resulting in a decrease in the cutting speed of the wire saw, so how do we resume cutting after using the wire saw for a period of time? What about speed?
Since the wire saw has a cutting direction, we should pay attention to the cutting direction of the wire saw when using it. We have to follow the direction of the arrows indicated on each clip of the jigsaw. Don't cut in the opposite direction so we don't end up with the front and back ends of the bead. Taper, to ensure the normal use of diamond beaded wire saw.
After the sintered diamond beaded wire saw has been used for a period of time, if you feel that the cutting speed has decreased, you can take a certain amount of refractory bricks and put them neatly on the mineral material for sharpening.
When the diamond rope wire saw is cutting, it must be cooled, otherwise the beads will be burned, and in severe cases, the entire diamond beaded wire saw will be scrapped.
Generally, we can use tap water to cool down the wire saw, but we cannot use cooling water at will. The more cooling water the better, the use of cooling water is regulated, the amount of cooling water is 1.5~2 times the diameter of the diamond beaded wire saw. , the operation can be adjusted according to the noise during cutting and the turbidity of cooling water. Too much cooling water will easily affect the self-grinding property of the diamond beaded wire saw, causing the wire saw to slip, and too little cooling water will easily cause the beads to heat up and affect the cutting life.
Know more about Z-LION Diamond Tools Group
Xiamen ZL Diamond Technology Co., Ltd. is a New Three Board listed enterprise, engaged in the development and application of diamond new material. We innovate new material and application in diamond super hard field, strive to offer advanced diamond new material application products and solution.
We mainly produce diamond tools including diamond polishing pads,diamond core drill bit, diamond wire saw, etc. Our products are widely used in the cutting, grinding and polishing field of stone, ceramic, glass, concrete.
For twenty years, we keep on focusing on the innovation of our products, make our efforts on brand management and marketing operation, keep raising high level of our brand and market ratio, get highly recognized by the diamond tools industry. We are honored as “National Intellectual Property Advantage Enterprises”, “Fujian Innovative Enterprises”, drafting unit of “Diamond Flexible Polishing Pads Industrial Standard”. At the same time, many products are first innovated by us. By far, we own 63 of domestic and international patents. Our products are welcome in the market of Europe, North and South American, South-East Asia, Middle Asia, etc. Good reputation has won praise and trust from home and abroad.
Contact us, you will get more than what you see.
-All diamond tools can be ordered and fabricated!
-Henry Wang | Quote Manager
-WhatsApp:+86-18030177538
-Email: ceo@zdiamondtools.com
-Web www.zdiamondtools.com
Company Profile
