Brief analysis of coating construction technology in waterborne epoxy floor paint, how to construct coating in waterborne floor paint  

Guide: Friends who know a little about waterborne epoxy floor paint should all know that the construction process must be without the coating. It can be said that it has the role of connecting the preceding and the following, so it is necessary to know the coating construction process of waterborne epoxy floor paint in advance. Let's add floor paint to look at it! 

1. The coating and the bottom have one thing in common in the construction is the need to ensure that the site is clean and without attachments. If the construction is carried out under the condition of small stones at the bottom, it will greatly affect the viscosity between the material and the bottom, and will directly lead to peeling. 

2. Then you can start to mix quartz sand with the corresponding main material, pay attention to the actual area demand of the site, too much or too little will affect the fluidity of the material and the final molding quality. 

3. Then it is necessary to scrape the middle coating material slowly and evenly with a professional trowel. The thickness of the process must be well controlled, otherwise it is easy to cause water and potholes in the later period. 

4, the last is to wait until the coating curing dry probably can have at least eight hours of time, check the ground in all have reached the standard under the premise of the surface can be constructed. 

Conclusion: The above is a brief analysis of the coating construction process of water-based epoxy floor paint. The overall steps can be roughly divided into four steps. The foundation must be well mastered at the beginning to achieve the best quality of the process.  

Z-LION Introduction

Nowadays, Z-LION has become one of the well-know manufacturers with complete variety of products in the industry. R&D and innovation capability have always been in the leading position. Products cover 32 categories in 5 major categories. So far, it has led the formulation of five industry standards, with a total of 63 domestic and international patents.  If you are looking for a reliable and strong manufacturer, we will never let you down.

-All diamond tools can be ordered and fabricated!
-Henry Wang | Quote Manager
-WhatsApp:+86-13459035657
-Email: ceo@zdiamondtools.com
-Web www.zdiamondtools.com

Company Profile

Certifications

Company Team

Exhibition

Logistics

FAQ