How to reduce the damage of forklift to epoxy floor?

Epoxy floor engineering is widely used in enterprises, especially large-scale production enterprises.Epoxy floor has the advantages of beautiful appearance, dustproof and easy cleaning, which greatly improves the whole production environment.But the production of forklifts and trailers often bring damage to the epoxy floor, let a person very distressed.So what can be done to reduce the damage?

Prevention is the most effective means to improve the use efficiency and service life of epoxy floor engineering.Therefore, we should consider the construction and future use intensity of the project in advance from the very beginning, so as to achieve a reasonable balance between construction and cost.

1. The concrete ground strength reaches the standard

The weight of the general transport forklift is about two tons, and the weight of the operator and the cargo may reach about three tons.This weight not only exerts pressure on the epoxy floor paint, but also tests the strength of the foundation.In order to reduce the compression deformation of paint layer caused by weak foundation, the ground strength should be tested before ground construction.The general ground strength should be above C25.If not enough, first solve the problem of ground strength, and then do epoxy floor paint construction.

2, improve the use of epoxy floor paint strength

By applying coating in epoxy mortar, the bearing strength and wear resistance of floor can be greatly improved.At the same time, the use of epoxy self-flow surface paint can also greatly improve the strength of the floor.If the preset strength for later use is large, the construction scheme of self-leveling in mid-coating is needed to ensure sufficient strength to cope with the high load strength.

3. Rational use of forklift trucks and other equipment

Epoxy floor paint has the characteristics of wear resistance and pressure resistance, but the smooth and bright surface effect is not very "wear resistance".After high frequency use, there will be a large number of scratches on the surface, which does not affect the strength, but the ornamental value is poor.

When using forklifts, they should be used in a balanced way.No sudden acceleration, sudden braking, sharp turning, etc.And the driving speed should not be too fast, and the fork should be kept within a reasonable range, so as to reduce the instantaneous pressure and friction on the floor surface and reduce unnecessary damage.

4. Keep the paint clean

Fine sand is the natural enemy of epoxy flooring.Granular is small again, intensity also is in 6.5 above, the paint film of 2.0 above does not have resistance almost in front of granular.Therefore, dust and other foreign bodies should be avoided from entering the epoxy floor as far as possible, especially in the environment of using forklifts, which will cause serious damage to the floor.

Therefore, on the one hand, the entry of foreign bodies should be reduced, on the other hand, timely cleaning should be done to reduce the damage of foreign bodies to the epoxy floor.The above measures can greatly improve the use efficiency and service life of epoxy floor, but damage in daily use is inevitable.For the surface damage that is not particularly serious, some repair measures can be taken to restore its good mechanical properties, so as to improve the overall service life of the floor.